ShenZhen Actelgame Electronic Co.,Ltd

PS3 Repair Parts

Home > Products > PlayStation 3 > PS3 Repair Parts
PS3 super slim Hard Disk Drive Mounting bracket

PS3 super slim Hard Disk Drive Mounting bracket

- Item No:A-PS3R-9C
- Retail Price: USD -

Features:

PS3 super slim Hard Disk Drive Mounting bracket

Hard Disk Drive Mounting Bracket for Super Slim PS3 CECH-400X Series

This mounting brack is compatible for PS3 system CECH-400X Series.
This is for the newest PS3 console, which has been nicknamed 'Super Slim'.If you have purchased the PS3 Super Slim 12gb model and wish to fit a hard drive. This is what you need (and of course a 2.5" SATA hard drive as well).Includes full instructions, and importantly the low profile headed screws required to mount the drive correctly and safely into your console.

Attaching the mounting bracket to the hard disk drive:
  The following types of hard disk drive may be used with the PS3 System
  Size 2.5 inch/63.5 mm (Internet type) *1
  Interface format Serial ATA *2
  *1 Proper operation is not guaranteed for all models
  *2 Parallel ATA is not supported

OPERATION:
Place the hard disk drive in the mounting bracket.
Ensure that the hard disk drive is oriented so that the connections on the hard disk drive can be accessed from outside of the mounting bracket.

Hold the hard disk drive lightly and turn it upside down together with the mounting bracket.
Place it on a soft, dry cloth. Do not forcefully push down on the hard disk drive.

Attach the hard disk drive to the mounting bracket with sliver screws.
While inserting the screws into the mounting bracket, keep the rubber inserts over the mounting bracket’s screw holes.

Installing the hard disk drive in the PS3 system
1. Press the power button to turn off the PS3 System.
The Power indicator turns solid red and the system enters standby mode.

Unplug the AC power cord, and then disconnect the other cables from the system.
For Safety reasons, remove the plug for power cord from the electrical outlet, and then detach the other cables.

Slide the HDD bay cover in the direction of the arrow to remove it.

 

 

Insert the hard disk drive into PS  3 system.
Be sure to fully insert the hard disk drive in the PS  3 system.
 


Install the hard disk drive in the PS3 system with the black screw.

Attach the HDD bay cover.

To remove the hard disk drive from the PS  3 system.
Remove the HDD bay cover.
Follow steps 1 to 3 under “Installing the hard disk drive in the PS  3 system” above
Remove the hard disk drive from the PS  3 system.
Remove the black screw.
Pull the right side of the handle towards you, then pull the hard disk drive to remove it.

 

Copying data to the hard disk drive
Turn on the PS  3 system, and then follow the on-screen instructions.
Data saved to the PS  3 system prior to installing the hard disk drive will be copied to the installed hard disk drive.

Notice
Any data that was previously saved to the installed hard disk drive will be deleted.

Hints
You must back up data on the PS  3 system before installing a hard disk drive if:
*You are replacing the hard disk drive at a later date by attaching another hard disk drive to the mounting bracket.
*You are installing a hard disk drive and the mounting bracket in CECH-400xC series

New Products
RP2040-zero Picofly

RP2040-zero Picofly

- Item No:A-NSM-13
XBOX Series X HDMI port 2.1

XBOX Series X HDMI port 2.1

- Item No:A-XSXR-6A
Xbox Series S Power Supply

Xbox Series S Power Supply

- Item No:A-XSXR-1A
S2PG001A PS4 IC chip

S2PG001A PS4 IC chip

- Item No:A-PS4R-44Y